Leisure

For repairing small holes and rips in trampolines.

Waterproof • Durable • Clear • Non Flammable

Directions

Clean around the damaged area. For small holes, apply a thick film (1.5mm) of glue over the damaged surface plus an extra 10mm around it and leave to cure. To fix holes larger than 5mm, cover the underside of the hole with sticky tape. Apply the glue over the top surface as a thick film. (The tape holds the glue in place as it cures.) After it has cured, remove the tape and apply another thick film of glue on the underside. Always glue up to 10mm beyond the edges of the hole. Leave for 24 hours for a full cure.

Perfect for repairing your trampoline!

General mintenance kit for repairing all types of outdoor clothing and footwear.

This unique repair kit comes in a very convnient bag with clip, perfect for outdoor expditions.

This selection of very special adhesive glue, tape, oil and shampoo are one of the few products that can repair leaks, cracks and rips on all coats, trousers, gloves, hats, suits, goggles, glasses, boots, shoes and trainers and many more!
Repairs are permanent, strong, waterproof, flexible and resistant to abrasion (weather and water abrasion).

You don't need to buy new, repair your favourite items with this selection Stormsure products. You can plug the hole or patch the tear or clean materials with this excellent product.

Stormsure Flexible Repair Adhesive is a very strong general purpose adhesive and it can also be used as a surface sealant. It exhibits special characteristics unlike many adhesives as it is highly flexible and stretchy after it has cured but it remains very strong. It fills gaps well, it is suitable for use indoors and outdoors and in marine environments. The adhesive can be painted on top of a surface to make it waterproof, airtight or abrasion resistant. Stormsure adhesive can often be used to cover holes without a patch. A thick film of adhesive will make a good repair. If the glue will drip through the hole just place some sticky tape behind the hole before applying the glue. It can be removed once the glue has cured.

Stormsure Flexible Repair Adhesive bonds to virtually all surfaces including neoprene, rubber, leather, PVC, polyurethane, breathable and coated fabrics, wood, metal and more. It is ideal for repairing cracks in rubber wellington boots, hiking boots, loose soles, leaks in waders, rips in wetsuits, damaged horse rugs, holes in tents and canopies, leaks and splits inflatable items and many other items too. It can also be used for repairs to woodwork and furniture, roof tiles and concrete. 
A tube of Stormsure Flexible Repair Adhesive is an essential part of a repair kit for hikers, DIY, fishermen, equestrians, hunters, divers, campers, surfers, sailors, engineers etc!
Comes with disposable gloves.

DIRECTIONS:
Use the adhesive at room temperature. Clean the damaged area to remove dirt and grease (sandpaper the surface for best adhesion). Apply a generous amount of Stormsure Flexible Repair Adhesive to the damaged area, with at least a 5mm extra around the damaged area. Leave horizontal and allow to cure for 10-12 hours.
TIPS:
Mix with Stormcure Accelerator to reduce cure time to approximately 1 hour. Ensure there is no air left in the tube before replacing cap.
Store partly-used tubes in a deep freezer.

P.U. Glue is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials. 

P.U. Glue is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding.

The glue is transparent so it won't discolour the objects you need to join. It is used for repairs and constructions where a very high connection strength is required and can be used indoors and outdoors.

This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

• Flexible and durable
• Fills gaps and cracks
• Excellent balance of flexibility and high strength
• Waterproof
• High cohesive strength
• Abrasion resistance
• Impact resistance
• Extremely tough

It allows bonding wood, concrete, stone, metals, laminate, plastic, glass, PU, polystyrene on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Complete curing time: 24 hours.

Resistent to temperatures from -30°C to +80°C.

To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces.

How to use: Surfaces to be bonded must be free of dirt (dust, grease, etc.) as much as possible. Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

P.U. Glue is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials. 

P.U. Glue is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding.

The glue is transparent so it won't discolour the objects you need to join. It is used for repairs and constructions where a very high connection strength is required and can be used indoors and outdoors.

This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

• Flexible and durable
• Fills gaps and cracks
• Excellent balance of flexibility and high strength
• Waterproof
• High cohesive strength
• Abrasion resistance
• Impact resistance
• Extremely tough

It allows bonding wood, concrete, stone, metals, laminate, plastic, glass, PU, polystyrene on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Complete curing time: 24 hours.

Resistent to temperatures from -30°C to +80°C.

To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces.

How to use: Surfaces to be bonded must be free of dirt (dust, grease, etc.) as much as possible. Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

P.U. Glue is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials. 

P.U. Glue is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding.

The glue is transparent so it won't discolour the objects you need to join. It is used for repairs and constructions where a very high connection strength is required and can be used indoors and outdoors.

This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

• Flexible and durable
• Fills gaps and cracks
• Excellent balance of flexibility and high strength
• Waterproof
• High cohesive strength
• Abrasion resistance
• Impact resistance
• Extremely tough

It allows bonding wood, concrete, stone, metals, laminate, plastic, glass, PU, polystyrene on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Complete curing time: 24 hours.

Resistent to temperatures from -30°C to +80°C.

To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces.

How to use: Surfaces to be bonded must be free of dirt (dust, grease, etc.) as much as possible. Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

What is Silicone?

• Stormsure Silicone is a Non-Staining No Oily Residue Silicone Adhesive and Sealant (Not all silicone adhesives are non-staining).

• Highly water repellent

• Highly resistant to weathering and ageing

• Electrically insulating Environmentally friendly, both in its production and in its application

• Resistant to many acids and other chemicals

Using silicone as a seam sealer: This type of sealer is ideal for outdoor gear and clothing made from synthetic materials. It's waterproof and flexible, making it ideal for sealing seams exposed to rain and other elements.

It is also ideal for sealing brickwork, tiles, slabs and concrete.

Advantages and Disadvantages of Silicone-Based Adhesives

A silicone rubber adhesive offers the user many different advantages:

PROS

• Temperature-resistant in a range from -85° to 572° Fahrenheit (-65° to 300° Celsius).

• Suitable for outdoor and indoor use

• Waterproof

• High UV and weathering resistance

• Highly elastic, making it suitable for bonding materials with different coefficients of thermal expansion, as well as for bonding vibrating parts Electrical non-conductor

CONS

Cannot withstand very high vibrations and strong movement loads in the long term due to its elasticity

One-component silicone adhesives generally not suitable for high-strength bonding that must withstand large loads on a permanent basis – over time, the silicone may wear and come loose

Cannot be painted over Produce an unpleasant odour of vinegar during curing phase

What is it used for?

The areas of application for silicone adhesives are diverse. For example, materials can be reliably bonded together, especially outdoors, where the adhesive seam must be weather-resistant and waterproof. Bonding and attaching tiles is also no problem with a silicone rubber adhesive. The following materials are reliably bonded with silicone-based glues:

• Outdoor gear and clothing made from synthetic materials

• Sealing seams exposed to rain and other elements

• Wood

• Glass

• Various plastics

• Metal

• Ceramics

• Enamel

• Paper and cardboard

• Brickwork, tiles, slabs, concrete

• Bathroom and kitchen sealant

Many users place particular emphasis on the ease of processing and flexibility of silicone, which is ideal for bonding substrates that are permanently exposed to vibrations or temperature fluctuations, such as:

• Parts on automobiles

• Fastening of illuminant parts

• Computer components

• Kitchen parts, for example on ovens or other electrical appliances

Preparation

Before you can bond the silicone, you must clean the substrates thoroughly. These must be free of any dirt, dust, oil, and grease. Any old grout must also be removed before you can bond new tiles with silicone, for example. The tiles to be laid or the other substrates can be cleaned with by rinsing it with water, but also with isopropanol or acetone.

Allow the surfaces to dry completely before starting the silicone bonding process. If the substrates show very uneven areas, these must still be filled or the surrounding raised areas must be ground down. Silicone is not suitable for bridging large gaps during the bonding process.

The Bonding Process

Before you apply the silicone adhesive to the actual substrates, it is recommended that you practice on a piece of cardboard. If the handling works well, you can apply the silicone to the substrates. Silicone can now be applied to one side of the entire surface to be bonded. If it is a large area, set the silicone more generously, but not too thickly. You can spread it out using a spatula.

Curing time should be 4-6 hours. But leave for 24 hours for complete cure.

The Finish

Stormsure is a NON-Staining Silicone Adhesive and Sealant.

Click here to read more on how to use Stormsure Silicone as a sealant

Glue for repairing all types of water sports equipment and clothing

This very special adhesive glue is one of the few products that can repair leaks, cracks and rips on water sport inflatables, equipment, canoes, sailing, boats, swimming, diving, kayaks, and clothing and many more!
Repairs are permanent, strong, waterproof, flexible and resistant to abrasion (weather and water abrasion).

A perfect way to get you back into the water safely, Stormsure glue is the perfect solution. You can plug the hole or patch the tear with this excellent product.

Stormsure Flexible Repair Adhesive is a very strong general purpose adhesive and it can also be used as a surface sealant. It exhibits special characteristics unlike many adhesives as it is highly flexible and stretchy after it has cured but it remains very strong. It fills gaps well, it is suitable for use indoors and outdoors and in marine environments. The adhesive can be painted on top of a surface to make it waterproof, airtight or abrasion resistant. Stormsure adhesive can often be used to cover holes without a patch. A thick film of adhesive will make a good repair. If the glue will drip through the hole just place some sticky tape behind the hole before applying the glue. It can be removed once the glue has cured.

Stormsure Flexible Repair Adhesive bonds to virtually all surfaces including neoprene, rubber, leather, PVC, polyurethane, breathable and coated fabrics, wood, metal and more. It is ideal for repairing cracks in rubber wellington boots, hiking boots, loose soles, leaks in waders, rips in wetsuits, damaged horse rugs, holes in tents and canopies, leaks and splits inflatable items and many other items too. It can also be used for repairs to woodwork and furniture, roof tiles and concrete. 
A tube of Stormsure Flexible Repair Adhesive is an essential part of a repair kit for hikers, DIY, fishermen, equestrians, hunters, divers, campers, surfers, sailors, engineers etc!
Comes with disposable gloves.

DIRECTIONS:
Use the adhesive at room temperature. Clean the damaged area to remove dirt and grease (sandpaper the surface for best adhesion). Apply a generous amount of Stormsure Flexible Repair Adhesive to the damaged area, with at least a 5mm extra around the damaged area. Leave horizontal and allow to cure for 24 hours.
TIPS:
Mix with Stormcure Accelerator to reduce cure time to approximately 1 hour. Ensure there is no air left in the tube before replacing cap.
Store partly-used tubes in a deep freezer.

The Stand Up Paddleboard Repair Kit is specifically tailored for the maintenance and repair of SUPs. This comprehensive kit contains 2x 5g tubes of Stormsure Flexible Repair Adhesive, a Tuff Tape strip, and two Tuff Tape patches, offering a complete solution for fixing punctures, tears, and abrasions on paddleboards, ensuring a strong, reliable, and lasting repair.

Kit Contents:

1. 2x 5g Tubes of Stormsure Flexible Repair Adhesive: These tubes of high-performance adhesive are perfect for creating a durable, waterproof bond on SUP materials, ideal for sealing small leaks and mending punctures.

2. 2x Tuff Tape Patches (75mm Diameter): Designed for larger areas of damage, these self-adhesive patches offer a quick and robust solution for repairing significant tears or cuts on the paddleboard.

3. 1x Tuff Tape Strip (15cm Long): A versatile, longer strip of Tuff Tape suitable for elongated damages or reinforcing seams and edges on the SUP.

Key Features:

1. Specially Formulated for SUPs: The adhesive and patches are developed to bond effectively with the materials used in stand-up paddleboards.

2. Waterproof and Durable: Ideal for water sports equipment, the repairs withstand exposure to water, UV light, and general wear and tear.

3. Simple and Efficient Application: The kit allows for easy, DIY repairs, enabling paddleboarders to quickly mend damages without professional assistance.

4. Comprehensive Repair Options: Offers both adhesive and patch solutions to cater to different types of damages on the paddleboard.

5. Compact and Portable: Small and lightweight, it's an essential part of any paddleboarding gear for emergency or routine repairs.

Benefits:

• Cost-Effective: Avoids the expense of professional repairs or purchasing a new SUP.
• Quick and Convenient Repairs: Ensures that your paddleboarding activities aren't interrupted by damage to your board.
• Strong and Long-Lasting Repairs: Offers peace of mind that the repair will hold up against regular use.
• Maintains SUP Performance: Keeps the paddleboard in optimal condition, ensuring safety and enjoyment on the water.

How to Use:

1. Clean and dry the damaged area on the paddleboard.
2. For small punctures, apply the adhesive directly. For larger tears or abrasions, use the Tuff Tape patch or strip over the adhesive.
3. Press down firmly to ensure a solid bond.
4. Allow the adhesive to fully cure for 24 - 48 hours (depending on conditions) before using the SUP.

The Stand Up Paddleboard Repair Kit is an indispensable tool for SUP enthusiasts, providing an all-in-one solution for maintaining and repairing their boards. Whether facing minor wear and tear or more significant damage, this kit ensures your paddleboard remains seaworthy and ready for your next adventure on the water.

The Inflatables Repair Kit is an all-encompassing solution designed for repairing a wide range of inflatable items, from pool toys and air mattresses to inflatable boats and bounce houses. This kit includes a 5g tube of specialized adhesive, two Tuff Tape patches, and a Tuff Tape strip, providing everything needed to fix punctures, tears, and leaks efficiently.

Kit Contents:

1. 5g Stormsure Flexible Repair Adhesive: A robust adhesive that bonds strongly with inflatable materials, ensuring airtight and watertight repairs for a variety of PVC and vinyl items.

2. 2x Tuff Tape Patches (75mm diameter): These self-adhesive patches are perfect for sealing larger damages, providing a secure and durable repair solution for inflatable items.

3. 1x Tuff Tape Strip (15cm long): A flexible strip of Tuff Tape, ideal for repairing elongated tears or seam issues on inflatables.

Key Features:

1. Broad Application: Suitable for a diverse range of inflatable products, including children's pool toys, air beds, and inflatable boats.

2. Strong and Waterproof Repairs: The adhesive and patches create a bond that withstands pressure and exposure to water.

3. Simple to Use: The kit is designed for easy application, allowing for quick repairs without the need for professional tools or skills.

4. Compact and Portable: Its small size makes it a convenient addition to camping gear, beach bags, or emergency repair kits.

5. Maintains Inflatable Integrity: Helps extend the life of inflatable items, preserving their usability and safety.

Benefits:

• Cost-Effective: Saves money by repairing instead of replacing expensive inflatables.
• Quick Fix Solution: Ideal for emergency repairs, restoring the functionality of inflatable items rapidly.
• Durable Repair: Ensures that inflatables can continue to be used safely and effectively.
• Easy to Carry: Its lightweight and compact nature make it a must-have for holidaymakers and outdoor enthusiasts.

How to Use:

1. Clean and dry the area of the inflatable needing repair.
2. Apply the adhesive to smaller punctures or cuts. For larger damages, use a Tuff Tape patch or the strip over the adhesive.
3. Press firmly to ensure a good bond.
4. Allow the repair to cure completely for 24 - 48 hours before reinflating the item.

The Inflatables Repair Kit is an indispensable tool for anyone who frequently uses inflatable products. Whether it’s a small hole in a beach ball or a significant tear in an air mattress, this kit provides a fast, effective, and reliable solution, ensuring your inflatable items remain functional for all your recreational or relaxation needs.

The Stormsure Trampoline Repair Kit is a specialised repair solution for mending trampolines, ensuring they remain safe and enjoyable for use. This kit is equipped with a 15g tube of clear Stormsure adhesive and two durable patches, providing a reliable fix for tears and holes in the trampoline mat.

Kit Contents:

1. 15g Tube of Clear Stormsure Flexible Repair Adhesive: A robust, waterproof adhesive that forms a strong, flexible bond, perfect for repairing small cuts and holes in the trampoline mat.

2. 2x Tuff Tape Patches: These patches are designed to cover and repair larger tears or holes, ensuring a secure and long-lasting fix.

Key Features:

1. Effective on Trampoline Materials: Specifically formulated to work on the fabrics used in trampoline mats.

2. Strong and Flexible Repairs: The adhesive and patches create a repair that withstands the stretching and bouncing associated with trampoline use.

3. Waterproof: Ideal for outdoor trampolines, the repair withstands exposure to the elements.

4. Easy Application: The kit is designed for easy use, enabling quick and hassle-free repairs.

Benefits:

• Cost-Effective: Extends the life of the trampoline, avoiding the need for costly replacements.
• Quick Repair Solution: Perfect for fixing damages promptly, reducing downtime.
• Durable Repair: Ensures the trampoline remains safe and usable for a long time.
• Clear Adhesive: Maintains the appearance of the trampoline mat.

How to Use:

1. Clean the area around the tear or hole in the trampoline mat.
2. Apply the clear adhesive to smaller damages directly. For larger tears, apply the adhesive and then place a patch over the area.
3. Press the patch firmly to ensure a secure bond.
4. Allow the adhesive to cure completely before using the trampoline again.

The Stormsure Trampoline Repair Kit is an invaluable tool for any trampoline owner, providing a simple yet effective solution for repairing common mat damages. Whether it's a small puncture or a larger tear, this kit ensures that your trampoline remains safe and enjoyable for everyone.

Click here to see How to Repair a Hole or Tear in a Trampoline Mat

The Inflatable Canoe and Kayak Repair Kit is a purpose-built solution for repairing inflatable watercraft. This kit, ideal for addressing damage in inflatable canoes and kayaks, includes a 5g tube of adhesive, two Tuff Tape patches, and a Tuff Tape strip, offering a comprehensive approach for fixing punctures, tears, and leaks, ensuring a reliable and durable repair.

Kit Contents:

1. 5g Tube of Stormsure Flexible Repair Adhesive: A high-performance adhesive designed to create a strong bond with the materials used in inflatable canoes and kayaks, ensuring a watertight seal.

2. 2x Tuff Tape Patches (75mm Diameter): These self-adhesive patches are perfectly sized for covering larger damages, providing a robust and waterproof repair.

3. 1x Tuff Tape Strip (15cm Long): A flexible strip for repairing longer tears or seam issues, easily customizable to fit the specific size and shape of the damage.

Key Features:

1. Specialized for Inflatable Watercraft: Tailored to work effectively on the materials used in inflatable canoes and kayaks.

2. Waterproof and Durable Repairs: Suitable for use in water environments, the adhesive and patches create a seal that withstands pressure and exposure to water.

3. Easy to Apply: The kit is designed for straightforward, DIY application, allowing for quick repairs without professional tools or skills.

4. Compact and Portable: Its small size makes it an essential part of any paddling trip, ensuring readiness for unexpected damages.

5. Preserves Craft Integrity: Helps maintain the functionality and safety of inflatable canoes and kayaks, extending their lifespan.

Benefits:

• Cost-Effective: Provides an affordable alternative to professional repair services or replacing damaged watercraft.
• Rapid Repair Solution: Enables on-the-spot repairs, crucial for uninterrupted water adventures.
• Strong Bonding: Ensures a long-lasting repair that can withstand the rigors of regular paddling and water exposure.
• Maintains Performance: Repairs are discreet and maintain the performance and appearance of the canoe or kayak.

How to Use:

1. Clean and dry the area on the inflatable canoe or kayak needing repair.
2. Apply the adhesive to smaller cuts and punctures. For larger tears, use a Tuff Tape patch or the strip, placing it over the adhesive.
3. Press the patch or strip firmly to ensure a good bond.
4. Allow the adhesive to cure completely for 24 - 48 hours (depending on conditions) before inflating and using the watercraft.

The Inflatable Canoe and Kayak Repair Kit is a must-have for paddlers and water sports enthusiasts. Whether it's a minor puncture or a significant tear, this kit provides a practical, efficient, and reliable solution, ensuring your inflatable watercraft remains in top condition for all your aquatic adventures.

Stormsure’s repair kits are all-in-one packs containing carefully selected contents that enable you to easily make reliable and long-lasting repairs to the respective type of item or piece of equipment.

DIRECTIONS

For instant repairs to punctures and splits on generally flat surfaces, clean the surface and apply a TUFF Tape patch or strip directly onto the damage. Rub with a smooth, hard object to ensure best adhesion and least air under the patch. 

For damage in awkward or hard to reach areas, clean the damaged are (sand for best results) and apply Stormsure Flexible Repair Adhesive directly onto the damage, leaving a 5mm excess overlapping around it. Leave flat and allow to cure for 24 hours.

TIPS

Mix with Stormcure Accelerator to reduce cure time to approximately 1 hour. Ensure there is no air left in the tube before replacing cap. Store partly used tubes in a freezer.