Other Brands

Odourless, non toxic and tasteless.

1m strip of nylon tape with hot melt adhesive on the back.

Model name: T-2000X

Size: 22mm x 1m

Colour: Dark grey

Directions: Seal into position with a hot iron to cover glued and stitched seams on wetsuits and dry suits, for a perfect finish.

For repairing small holes and rips in trampolines.

Waterproof • Durable • Clear • Non Flammable

Directions

Clean around the damaged area. For small holes, apply a thick film (1.5mm) of glue over the damaged surface plus an extra 10mm around it and leave to cure. To fix holes larger than 5mm, cover the underside of the hole with sticky tape. Apply the glue over the top surface as a thick film. (The tape holds the glue in place as it cures.) After it has cured, remove the tape and apply another thick film of glue on the underside. Always glue up to 10mm beyond the edges of the hole. Leave for 24 hours for a full cure.

Perfect for repairing your trampoline!

P.U. Glue is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials. 

P.U. Glue is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding.

The glue is transparent so it won't discolour the objects you need to join. It is used for repairs and constructions where a very high connection strength is required and can be used indoors and outdoors.

This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

• Flexible and durable
• Fills gaps and cracks
• Excellent balance of flexibility and high strength
• Waterproof
• High cohesive strength
• Abrasion resistance
• Impact resistance
• Extremely tough

It allows bonding wood, concrete, stone, metals, laminate, plastic, glass, PU, polystyrene on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Complete curing time: 24 hours.

Resistent to temperatures from -30°C to +80°C.

To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces.

How to use: Surfaces to be bonded must be free of dirt (dust, grease, etc.) as much as possible. Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

P.U. Glue is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials. 

P.U. Glue is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding.

The glue is transparent so it won't discolour the objects you need to join. It is used for repairs and constructions where a very high connection strength is required and can be used indoors and outdoors.

This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

• Flexible and durable
• Fills gaps and cracks
• Excellent balance of flexibility and high strength
• Waterproof
• High cohesive strength
• Abrasion resistance
• Impact resistance
• Extremely tough

It allows bonding wood, concrete, stone, metals, laminate, plastic, glass, PU, polystyrene on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Complete curing time: 24 hours.

Resistent to temperatures from -30°C to +80°C.

To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces.

How to use: Surfaces to be bonded must be free of dirt (dust, grease, etc.) as much as possible. Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

P.U. Glue is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials. 

P.U. Glue is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding.

The glue is transparent so it won't discolour the objects you need to join. It is used for repairs and constructions where a very high connection strength is required and can be used indoors and outdoors.

This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

• Flexible and durable
• Fills gaps and cracks
• Excellent balance of flexibility and high strength
• Waterproof
• High cohesive strength
• Abrasion resistance
• Impact resistance
• Extremely tough

It allows bonding wood, concrete, stone, metals, laminate, plastic, glass, PU, polystyrene on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Complete curing time: 24 hours.

Resistent to temperatures from -30°C to +80°C.

To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces.

How to use: Surfaces to be bonded must be free of dirt (dust, grease, etc.) as much as possible. Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

What is Silicone?

• Stormsure Silicone is a Non-Staining No Oily Residue Silicone Adhesive and Sealant (Not all silicone adhesives are non-staining).

• Highly water repellent

• Highly resistant to weathering and ageing

• Electrically insulating Environmentally friendly, both in its production and in its application

• Resistant to many acids and other chemicals

Using silicone as a seam sealer: This type of sealer is ideal for outdoor gear and clothing made from synthetic materials. It's waterproof and flexible, making it ideal for sealing seams exposed to rain and other elements.

It is also ideal for sealing brickwork, tiles, slabs and concrete.

Advantages and Disadvantages of Silicone-Based Adhesives

A silicone rubber adhesive offers the user many different advantages:

PROS

• Temperature-resistant in a range from -85° to 572° Fahrenheit (-65° to 300° Celsius).

• Suitable for outdoor and indoor use

• Waterproof

• High UV and weathering resistance

• Highly elastic, making it suitable for bonding materials with different coefficients of thermal expansion, as well as for bonding vibrating parts Electrical non-conductor

CONS

Cannot withstand very high vibrations and strong movement loads in the long term due to its elasticity

One-component silicone adhesives generally not suitable for high-strength bonding that must withstand large loads on a permanent basis – over time, the silicone may wear and come loose

Cannot be painted over Produce an unpleasant odour of vinegar during curing phase

What is it used for?

The areas of application for silicone adhesives are diverse. For example, materials can be reliably bonded together, especially outdoors, where the adhesive seam must be weather-resistant and waterproof. Bonding and attaching tiles is also no problem with a silicone rubber adhesive. The following materials are reliably bonded with silicone-based glues:

• Outdoor gear and clothing made from synthetic materials

• Sealing seams exposed to rain and other elements

• Wood

• Glass

• Various plastics

• Metal

• Ceramics

• Enamel

• Paper and cardboard

• Brickwork, tiles, slabs, concrete

• Bathroom and kitchen sealant

Many users place particular emphasis on the ease of processing and flexibility of silicone, which is ideal for bonding substrates that are permanently exposed to vibrations or temperature fluctuations, such as:

• Parts on automobiles

• Fastening of illuminant parts

• Computer components

• Kitchen parts, for example on ovens or other electrical appliances

Preparation

Before you can bond the silicone, you must clean the substrates thoroughly. These must be free of any dirt, dust, oil, and grease. Any old grout must also be removed before you can bond new tiles with silicone, for example. The tiles to be laid or the other substrates can be cleaned with by rinsing it with water, but also with isopropanol or acetone.

Allow the surfaces to dry completely before starting the silicone bonding process. If the substrates show very uneven areas, these must still be filled or the surrounding raised areas must be ground down. Silicone is not suitable for bridging large gaps during the bonding process.

The Bonding Process

Before you apply the silicone adhesive to the actual substrates, it is recommended that you practice on a piece of cardboard. If the handling works well, you can apply the silicone to the substrates. Silicone can now be applied to one side of the entire surface to be bonded. If it is a large area, set the silicone more generously, but not too thickly. You can spread it out using a spatula.

Curing time should be 4-6 hours. But leave for 24 hours for complete cure.

The Finish

Stormsure is a NON-Staining Silicone Adhesive and Sealant.

Click here to read more on how to use Stormsure Silicone as a sealant

A perfect alternative to Shoe Goo!

Waterproof • Tough • Flexible

Made from Multi-Purpose Industrial Strength Original E6000 Glue

Shoe Glu is a superior no mess adhesive and sealant that easily and permanently repairs all types of footwear. It adheres to all kinds of materials, so use Shoe Glu to mend rubber soles, tears in canvas or leather tops or to stop shoe laces from fraying. It dries to a waterproof, flexible rubber, so it will repair waders and boots without breaking or cracking.

Directions

Clean damaged area. Apply glue directly over the damage as a layer.

In case of two components having come apart (such as loose soles), apply glue to both sides and keep pressed together until cured.

Glue remains flexible when cured. Full cure takes 12 hours. Clear and suitable for all colours.

Perfect for your favourite training shoes.

Fixathix is a multi-purpose, non-drip contact adhesive intended for bonding laminated plastics to wood, hardwood, chipboard and other substrates.

Perfect alternative to Alpha Thixofix.

This small plastic box contains carabiners which are accompanied by plastic clips to make them work.

These clever clips attached to most fabrics and enable you to make an extra attachement point. You can use this on a tent to add extra support and guide ropes. On backpacks you can add several and then use a pack net to carry extra items. On clothing you can use it to attach cameras, keys and other small items which you need to keep handy. Sold in pairs.

Very simple to use and very effective.

BLACK AIR BRUSH BRAIDED HOSE WITH 1/8" BSP

1/8" SWIVEL FITTING AIR BRUSH RUBBER

BRAIDED AIR HOSE 3 METRE.
This braided air hose is supplied with the fittings necessary to connect to all Iwata airbrushes and the EW-440 / bd-128p / bd-132 and many, many more (all apart from the tiny 5mm badger fitting).
The hose connects directly to the airbrush one end with a 1/8" BSP - 1/8" BSP swivel nut.
The other nut is for connection to your compressor or air supply.

Squeeze a small amount onto your fingers and then rub it onto the fly line leader and tippet.

When the line lands on the water the Sinker breaks instantly through the meniscus on the water and the line sinks below the surface. The light is refracted by the ent in the meniscus and a floating line is blindingly obvious when seen from below; however is becomes almost invisible when it has broken through the meniscus.  

MULTI PURPOSE

A synthetic rubber glue which sticks to many surfaces. Cures in 6-10 hours. Non Flammable, Waterproof and abrasion resistant.

Directions

Clean damaged area. Apply glue directly over the damage as a layer. In case of two components having come apart (such as loose soles), apply glue to both sides and keep pressed together until cured. Glue remains flexible when cured. Full cure takes 12 hours. Clear and suitable for all colours. 

Contains our special adhesive for fixing PVC patches. These are great for patching over holes and leaks on paddling pools and other items made from PVC. You need to have a patch of suitable material.

Make up you own repair kits

PVc glue can also be used for a host of other jobs as it contains both a voltile solvent for dissolving pvc and polyurethane for extra strength.  It does not have  quite the same charactheristics as Stormsure adhesive however.

Waterproof Flexible Repair Adhesive

MULTI PURPOSE

Directions

Clean damaged area. Apply glue directly over the damage as a layer. In case of two components having come apart (such as loose soles), apply glue to both sides and keep pressed together until cured. Glue remains flexible when cured. Full cure takes 12 hours. Clear and suitable for all colours. Suitable for canvas, leather, nubuck, synthetic materials, polyester, nylon, rubber and more. Perfect for your favourite training shoes.

This is a clear odourless oil which will help keep the fly dry and on the waters surface Just put a drop on you fingers and rub it into the feathers.

Squeezable bottle with dropper cap. Can be used with one hand.

Devcon Duco Plastic and Model Cement is ideal for bonding polystyrene plastic models and toys. It is good to use removable tape on areas that you do not want the cement to get on. Before the cement cures, remove the tape. Flammable, keep away from heat, sparks and open flame. Dries clear, with a tensile strength of 300 PSI. Temperature Range: 200°F.

Handling time: 10 minutes; Set time: 2 hours; Cure time: 24 hours

50m roll of nylon tape with hot melt adhesive on the back.

Model name: T-2000X

Size: 22mm x 50m

Colour: Dark grey

Directions: Seal into position with a hot iron to cover glued and stitched seams on wetsuits and dry suits, for a perfect finish.

The Inflatables Repair Kit is an all-encompassing solution designed for repairing a wide range of inflatable items, from pool toys and air mattresses to inflatable boats and bounce houses. This kit includes a 5g tube of specialized adhesive, two Tuff Tape patches, and a Tuff Tape strip, providing everything needed to fix punctures, tears, and leaks efficiently.

Kit Contents:

1. 5g Stormsure Flexible Repair Adhesive: A robust adhesive that bonds strongly with inflatable materials, ensuring airtight and watertight repairs for a variety of PVC and vinyl items.

2. 2x Tuff Tape Patches (75mm diameter): These self-adhesive patches are perfect for sealing larger damages, providing a secure and durable repair solution for inflatable items.

3. 1x Tuff Tape Strip (15cm long): A flexible strip of Tuff Tape, ideal for repairing elongated tears or seam issues on inflatables.

Key Features:

1. Broad Application: Suitable for a diverse range of inflatable products, including children's pool toys, air beds, and inflatable boats.

2. Strong and Waterproof Repairs: The adhesive and patches create a bond that withstands pressure and exposure to water.

3. Simple to Use: The kit is designed for easy application, allowing for quick repairs without the need for professional tools or skills.

4. Compact and Portable: Its small size makes it a convenient addition to camping gear, beach bags, or emergency repair kits.

5. Maintains Inflatable Integrity: Helps extend the life of inflatable items, preserving their usability and safety.

Benefits:

• Cost-Effective: Saves money by repairing instead of replacing expensive inflatables.
• Quick Fix Solution: Ideal for emergency repairs, restoring the functionality of inflatable items rapidly.
• Durable Repair: Ensures that inflatables can continue to be used safely and effectively.
• Easy to Carry: Its lightweight and compact nature make it a must-have for holidaymakers and outdoor enthusiasts.

How to Use:

1. Clean and dry the area of the inflatable needing repair.
2. Apply the adhesive to smaller punctures or cuts. For larger damages, use a Tuff Tape patch or the strip over the adhesive.
3. Press firmly to ensure a good bond.
4. Allow the repair to cure completely for 24 - 48 hours before reinflating the item.

The Inflatables Repair Kit is an indispensable tool for anyone who frequently uses inflatable products. Whether it’s a small hole in a beach ball or a significant tear in an air mattress, this kit provides a fast, effective, and reliable solution, ensuring your inflatable items remain functional for all your recreational or relaxation needs.