Other Brands

1m strip of nylon tape with hot melt adhesive on the back.

Model name: T-2000X

Size: 22mm x 1m

Colour: Dark grey

Directions: Seal into position with a hot iron to cover glued and stitched seams on wetsuits and dry suits, for a perfect finish.

For repairing small holes and rips in trampolines.

Waterproof • Durable • Clear • Non Flammable

Directions

Clean around the damaged area. For small holes, apply a thick film (1.5mm) of glue over the damaged surface plus an extra 10mm around it and leave to cure. To fix holes larger than 5mm, cover the underside of the hole with sticky tape. Apply the glue over the top surface as a thick film. (The tape holds the glue in place as it cures.) After it has cured, remove the tape and apply another thick film of glue on the underside. Always glue up to 10mm beyond the edges of the hole. Leave for 24 hours for a full cure.

Perfect for repairing your trampoline!

Fixathix is a multi-purpose, non-drip contact adhesive intended for bonding laminated plastics to wood, hardwood, chipboard and other substrates.

Perfect alternative to Alpha Thixofix.

BLACK AIR BRUSH BRAIDED HOSE WITH 1/8" BSP

1/8" SWIVEL FITTING AIR BRUSH RUBBER

BRAIDED AIR HOSE 3 METRE.
This braided air hose is supplied with the fittings necessary to connect to all Iwata airbrushes and the EW-440 / bd-128p / bd-132 and many, many more (all apart from the tiny 5mm badger fitting).
The hose connects directly to the airbrush one end with a 1/8" BSP - 1/8" BSP swivel nut.
The other nut is for connection to your compressor or air supply.

MULTI PURPOSE

A synthetic rubber glue which sticks to many surfaces. Cures in 6-10 hours. Non Flammable, Waterproof and abrasion resistant.

Directions

Clean damaged area. Apply glue directly over the damage as a layer. In case of two components having come apart (such as loose soles), apply glue to both sides and keep pressed together until cured. Glue remains flexible when cured. Full cure takes 12 hours. Clear and suitable for all colours. 

Waterproof Flexible Repair Adhesive

MULTI PURPOSE

Directions

Clean damaged area. Apply glue directly over the damage as a layer. In case of two components having come apart (such as loose soles), apply glue to both sides and keep pressed together until cured. Glue remains flexible when cured. Full cure takes 12 hours. Clear and suitable for all colours. Suitable for canvas, leather, nubuck, synthetic materials, polyester, nylon, rubber and more. Perfect for your favourite training shoes.

50m roll of nylon tape with hot melt adhesive on the back.

Model name: T-2000X

Size: 22mm x 50m

Colour: Dark grey

Directions: Seal into position with a hot iron to cover glued and stitched seams on wetsuits and dry suits, for a perfect finish.

Morphits Polymorph is a hand mouldable thermoplastic, which comes in the form of 2mm white beads.

Melts at 62ºC in hot water or any other heat source. Non-toxic. Mould it into the shape you need and let it cool to room temperature. Recycle it many times by reheating.

Durable, Non-Brittle, Easy to use, Non-Toxic, reusable, biodegradable, Hundreds of uses.

Morphits polymorph is a linear polycaprolactone (PCL) monomer grade with high molecular weight (about 50,000). It is also at printable grade, exhibiting very good biodegradability and resistance to tear, moisture and impact.

Used for DIY, crafts, Repairs and many more…

Provides flexibility, enhanced durability, high elongation and excellent low temperature performance.

Directions: Place a spoonful beads in a cup and add boiling water. The beads quickly melt together and become transparent. The melted plastic can be moulded by hand, rolled out into sheets and stuck onto many surfaces. Polymorph can be reheated and remelted and reused many times over, so it is fully recyclable.

Morphits Polymorph is a hand mouldable thermoplastic, which comes in the form of 2mm white beads.

Melts at 62ºC in hot water or any other heat source. Non-toxic. Mould it into the shape you need and let it cool to room temperature. Recycle it many times by reheating.

Durable, Non-Brittle, Easy to use, Non-Toxic, reusable, biodegradable, Hundreds of uses.

Morphits polymorph is a linear polycaprolactone (PCL) monomer grade with high molecular weight (about 50,000). It is also at printable grade, exhibiting very good biodegradability and resistance to tear, moisture and impact.

Used for DIY, crafts, Repairs and many more…

Provides flexibility, enhanced durability, high elongation and excellent low temperature performance.

Directions: Place a spoonful beads in a cup and add boiling water. The beads quickly melt together and become transparent. The melted plastic can be moulded by hand, rolled out into sheets and stuck onto many surfaces. Polymorph can be reheated and remelted and reused many times over, so it is fully recyclable.

Morphits Polymorph is a hand mouldable thermoplastic, which comes in the form of 2mm white beads.

Melts at 62ºC in hot water or any other heat source. Non-toxic. Mould it into the shape you need and let it cool to room temperature. Recycle it many times by reheating.

Durable, Non-Brittle, Easy to use, Non-Toxic, reusable, biodegradable, Hundreds of uses.

Morphits polymorph is a linear polycaprolactone (PCL) monomer grade with high molecular weight (about 50,000). It is also at printable grade, exhibiting very good biodegradability and resistance to tear, moisture and impact.

Used for DIY, crafts, Repairs and many more…

Provides flexibility, enhanced durability, high elongation and excellent low temperature performance.

Directions: Place a spoonful beads in a cup and add boiling water. The beads quickly melt together and become transparent. The melted plastic can be moulded by hand, rolled out into sheets and stuck onto many surfaces. Polymorph can be reheated and remelted and reused many times over, so it is fully recyclable.

The Inflatables Repair Kit is an all-encompassing solution designed for repairing a wide range of inflatable items, from pool toys and air mattresses to inflatable boats and bounce houses. This kit includes a 5g tube of specialized adhesive, two Tuff Tape patches, and a Tuff Tape strip, providing everything needed to fix punctures, tears, and leaks efficiently.

Kit Contents:

1. 5g Stormsure Flexible Repair Adhesive: A robust adhesive that bonds strongly with inflatable materials, ensuring airtight and watertight repairs for a variety of PVC and vinyl items.

2. 2x Tuff Tape Patches (75mm diameter): These self-adhesive patches are perfect for sealing larger damages, providing a secure and durable repair solution for inflatable items.

3. 1x Tuff Tape Strip (15cm long): A flexible strip of Tuff Tape, ideal for repairing elongated tears or seam issues on inflatables.

Key Features:

1. Broad Application: Suitable for a diverse range of inflatable products, including children's pool toys, air beds, and inflatable boats.

2. Strong and Waterproof Repairs: The adhesive and patches create a bond that withstands pressure and exposure to water.

3. Simple to Use: The kit is designed for easy application, allowing for quick repairs without the need for professional tools or skills.

4. Compact and Portable: Its small size makes it a convenient addition to camping gear, beach bags, or emergency repair kits.

5. Maintains Inflatable Integrity: Helps extend the life of inflatable items, preserving their usability and safety.

Benefits:

• Cost-Effective: Saves money by repairing instead of replacing expensive inflatables.
• Quick Fix Solution: Ideal for emergency repairs, restoring the functionality of inflatable items rapidly.
• Durable Repair: Ensures that inflatables can continue to be used safely and effectively.
• Easy to Carry: Its lightweight and compact nature make it a must-have for holidaymakers and outdoor enthusiasts.

How to Use:

1. Clean and dry the area of the inflatable needing repair.
2. Apply the adhesive to smaller punctures or cuts. For larger damages, use a Tuff Tape patch or the strip over the adhesive.
3. Press firmly to ensure a good bond.
4. Allow the repair to cure completely for 24 - 48 hours before reinflating the item.

The Inflatables Repair Kit is an indispensable tool for anyone who frequently uses inflatable products. Whether it’s a small hole in a beach ball or a significant tear in an air mattress, this kit provides a fast, effective, and reliable solution, ensuring your inflatable items remain functional for all your recreational or relaxation needs.