Stormsure Footwear Repair

Stormseal Seam Sealer 5L

Stormseal is a water-based seam sealer that comes in a squeezable bottle with a foam pad for easy and precise application. The liquid soaks in to pinholes and leaking seams and dries clear, leaving a flexible and waterproof surface. It contains no VOC’s and is non-toxic.

DIRECTIONS

Distribute product into foam-pad bottles. Clean area. Remove cap and brush on a generous layer Stormseal using the foam pad by gently squeezing the bottle. Allow to seep in and cure for 15-25 minutes or until clear and dry.

Stormsure Flexible Repair Adhesive - 3x5g (Black)

£6.63 As low as £3.71

It's all about Stormsure Flexible Repair Adhesive

How to Repair using Polyurethane Adhesive

Stormsure Flexible Repair Adhesive is a polyurethane based adhesive and can be used in situations that demand extremely high durability, strength and flexibility. The degree of elasticity offered allows for use for both static as well as for more flexible bonding and sealing purposes. These adhesive types are formulated from polymers and solvents.

Stormsure can be used as either an adhesive to join two surfaces together, or as a surface sealant when spread over just one surface.
Bonds to virtually all surfaces. It allows bonding wood, concrete, stone, metals, laminate, plastics, glass, PU, and most flexible natural and man made fabrics on themselves or in combination. It can also be used to glue models, flexible fabrics, inflatable items, waterproof items, brickwork, joinery and a huge range of other things too.
Stormsure is a liquid polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials
Stormsure is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong and waterproof bonding. It is suitable for indoor and outdoor use.
The glue is transparent so it won't normally discolour the objects you need to join.
Always check for compatibility on fabrics in an inconsipcuous area before making a major repair. It is used for repairs and construction where a very high connection strength is required. It can be used indoors and outdoors and will last for a long time under water too.
Complete curing time: 24 hours. Resistent to temperatures from -30°C to +80°C.
How to use: Surfaces to be bonded must be clean and free of dirt (dust, grease, etc.). Apply glue to one of the surfaces to be bonded. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.
TIPS: Store partly-used tubes in a deep freezer. Warm up to room temperature before re-use.

The Science

In the case of Stormsure adhesive – the liquid glue will start to cure when it is exposed to even the smallest amount of water vapour in the air. This initiates a chemical chain reaction which will continue until all the glue has cured. The glue should be used at room temperature (15°C - 25°C for best results). Do not use below 5°C. If the glue is too cold the it may appear white and waxy. - Just warm it up until it is a liquid again and it will work fine.

This adhesive is a single component moisture curing product. It has 70% solids content and will only shrink slightly as it cures but this helps to create a very strong and tight bond on most surfaces. It can be used to fill gaps and holes.

What is it used for?

Stormsure adhesive is incredibly versatile, making it a good choice for those needing an all-purpose adhesive that is flexible and durable. Stormsure can be used to bond leather, tile, rubber, PVC, wood, concrete, stone, metals, laminate, most plastics glass and PU on themselves or in combination. It can also be used to glue models, joinery, door sills, stairs, skirting boards, window sills.

Other Characteristics

It also offers complete water resistance and allows sanding and painting when it has dried completely. Polyurethane glue can also fill and even out inconsistencies in the surface you use it on. Characteristics like these, and numerous others, make this type of adhesive an essential tool that is well suited for a wide range of bonding applications.

Stormsure Flexible Repair Adhesive is a liquid clear polyurethane-based (PU) adhesive that has been specifically developed to provide strong and reliable bonding to a wide range of materials.
Stormsure Flexible Repair Adhesive is a one-part polyurethane adhesive that reacts with moisture to polymerize and cure which provides very strong, flexible and waterproof bonding.
The glue is black. It is also available in White, Khaki and Clear. It is used for repairs and constructions where a very high connection strength is required and can be used indoors, outdoors and gor repairs that will be under water..
This glue increases its volume when curing allowing it to fill irregularities. It is resistant to humidity (Class D4), shock and vibrations and temperature variations.

How To Use Stormsure

Surfaces to be bonded must be clean and free of dirt (dust, mud, grease, etc.). You can use an alcohol wipe to clean the surfaces, if not, then just soap and water will do. Be sure the surfaces are dry before application. Apply the glue to one of the surfaces to be bonded. To ensure the best result, at least one of the surfaces must be porous or permeable. Thus, it is recommended to sand/roughen smooth surfaces. Assemble immediately. Press strongly and immobilize for at least 10-12 hours.

Conclusion

Despite the marginally higher cost of polyurethane adhesives, they do offer plenty of worthwhile benefits. They are well suited for use with a variety of different materials, and their strong adhesion allows single-sided application. Polyurethane adhesives are easy to work with. Polyurethane adhesives are also highly resistant to the elements and can endure heavy contact and impact.

Stormsure Flexible Repair Adhesive 15g (Clear)

£6.00 As low as £3.36

It's all about Stormsure Flexible Repair Adhesive

The Stormsure Flexible Repair Adhesive Clear (15g) is a versatile, high-strength adhesive designed for a wide array of repair needs. This clear adhesive is perfect for a multitude of applications, offering a flexible, waterproof, and durable bond. It's ideal for repairing items like outdoor gear, footwear, inflatable items, tents, and much more, ensuring a reliable and long-lasting fix.

Key Features:

Strong and Flexible Bond: Provides a robust bond that remains flexible once cured, ideal for materials that need to retain elasticity.
Clear Formula: The adhesive dries clear, making it suitable for repairs where appearance is important, leaving a clean and unobtrusive finish.
Waterproof and Durable: Once cured, the adhesive creates a waterproof seal, making it perfect for outdoor and water-related repairs.
Multipurpose Use: Ideal for repairing a wide range of materials, including rubber, leather, PVC, neoprene, canvas, and various fabrics.
Easy Application: The tube allows for precise application, making it simple to apply the right amount of adhesive exactly where it's needed.

Benefits:

Versatile Repair Solution: Suitable for everything from patching a tent to fixing a shoe sole or mending an inflatable pool toy.
Cost-Effective: Saves money by enabling easy repairs instead of needing to replace damaged items.
Long-Lasting Repairs: Offers a durable solution that withstands wear and tear, as well as exposure to the elements.
User-Friendly: Easy to use for both quick fixes and more complex repairs.

How to Use:

Ensure the surface to be repaired is clean and dry.
Apply the adhesive directly to the damaged area.
If necessary, press the two surfaces together and remove any excess adhesive.
Allow to cure for 12-24 hours (depending on conditions) for optimal strength.

The Stormsure Flexible Repair Adhesive Clear (15g) is an essential tool for any repair kit, whether at home, in the workshop, or on the go. It's a go-to solution for a diverse range of repair tasks, ensuring that your gear and items remain functional and well-maintained, saving time and money in the long run.

Stormproof Durable Water Repellent 500ml

£9.96 As low as £4.55

View the Stormproof size guide HERE

For wet weather garments and equipment

Stormsure's Stormproof is a spray-on durable water repellent that you should use on outdoor gear such as foul weather clothing, raincoats, woollen coats, hats, breathable jackets, fleeces, tweeds, synthetics, tents and footwear.

It effectively repels water, oil and soil and works perfectly on nylon, cotton, polyester, wool, leather and more. Water just rolls off the surface without wetting it.
To use, simply spray evenly onto your garment and allow to fully dry in a warm place.
Stormproof is non-toxic and does not have a nauseating chemical smell, meaning it can be used in any environment and not necessarily outdoors.
Easy spray-on application method for all types of fabrics. Water based, fluorocarbon-free & environmentally responsible

Available in 250ml, 500ml, 1L, 5L and 25L

Unlike some other waterproofing sprays, Stormproof is non-toxic and does not have a nauseating chemical smell, meaning it can be used in any environment and not necessarily outdoors.

Works great with climatic membranes like GORE-TEX
Adds or renews water repellency and revives breathability
Prolongs the life of gear and optimises outdoor performance

Stormproof Durable Water Repellent 5L Refill

£41.63 As low as £19.67