Accessories

Comes in an easy to apply, compact, sprayable bottle with a resealable cap.

Rub a small amount of Anti Fog Liquid onto glass and polish until invisible.

Condensation will not form on the treated area.  Repeat as necessary.  Works on all shiny surfaces.

Special Odour and taste free lubricating oil for all types of Zip.

Apply a small amount along the length of a zip and move the zip puller up and down until it runs freely.

It will help smooth sliding of zip pullers on the teeth when used regularly. This oil is food grade, odourless and taste free.

Zip pull size chart

Odourless, non toxic and tasteless.

A pack of 3 black nylon fabric patches.

Use these when making repairs on ripped items of clothing, horse rugs etc.

Mix a small amount of this accelerator with Stormsure Flexible Repair Adhesive and it will help reduce the cure time from 10-12 hours down to about 1-2 hours.

This can be used to thin down Stormsure Flexible Repair Adhesive. The facilitates painting thin layers of adhesive onto surfaces as a sealer and waterproofing agent.

You can apply several layers on top of each other.  Thinned solutions will seep into small holes made by sewing machines and also wick into the threads.

1m strip of nylon tape with hot melt adhesive on the back.

Model name: T-2000X

Size: 22mm x 1m

Colour: Dark grey

Directions: Seal into position with a hot iron to cover glued and stitched seams on wetsuits and dry suits, for a perfect finish.

General mintenance kit for repairing all types of outdoor clothing and footwear.

This unique repair kit comes in a very convnient bag with clip, perfect for outdoor expditions.

This selection of very special adhesive glue, tape, oil and shampoo are one of the few products that can repair leaks, cracks and rips on all coats, trousers, gloves, hats, suits, goggles, glasses, boots, shoes and trainers and many more!
Repairs are permanent, strong, waterproof, flexible and resistant to abrasion (weather and water abrasion).

You don't need to buy new, repair your favourite items with this selection Stormsure products. You can plug the hole or patch the tear or clean materials with this excellent product.

Stormsure Flexible Repair Adhesive is a very strong general purpose adhesive and it can also be used as a surface sealant. It exhibits special characteristics unlike many adhesives as it is highly flexible and stretchy after it has cured but it remains very strong. It fills gaps well, it is suitable for use indoors and outdoors and in marine environments. The adhesive can be painted on top of a surface to make it waterproof, airtight or abrasion resistant. Stormsure adhesive can often be used to cover holes without a patch. A thick film of adhesive will make a good repair. If the glue will drip through the hole just place some sticky tape behind the hole before applying the glue. It can be removed once the glue has cured.

Stormsure Flexible Repair Adhesive bonds to virtually all surfaces including neoprene, rubber, leather, PVC, polyurethane, breathable and coated fabrics, wood, metal and more. It is ideal for repairing cracks in rubber wellington boots, hiking boots, loose soles, leaks in waders, rips in wetsuits, damaged horse rugs, holes in tents and canopies, leaks and splits inflatable items and many other items too. It can also be used for repairs to woodwork and furniture, roof tiles and concrete. 
A tube of Stormsure Flexible Repair Adhesive is an essential part of a repair kit for hikers, DIY, fishermen, equestrians, hunters, divers, campers, surfers, sailors, engineers etc!
Comes with disposable gloves.

DIRECTIONS:
Use the adhesive at room temperature. Clean the damaged area to remove dirt and grease (sandpaper the surface for best adhesion). Apply a generous amount of Stormsure Flexible Repair Adhesive to the damaged area, with at least a 5mm extra around the damaged area. Leave horizontal and allow to cure for 10-12 hours.
TIPS:
Mix with Stormcure Accelerator to reduce cure time to approximately 1 hour. Ensure there is no air left in the tube before replacing cap.
Store partly-used tubes in a deep freezer.

What is Silicone?

• Stormsure Silicone is a Non-Staining No Oily Residue Silicone Adhesive and Sealant (Not all silicone adhesives are non-staining).

• Highly water repellent

• Highly resistant to weathering and ageing

• Electrically insulating Environmentally friendly, both in its production and in its application

• Resistant to many acids and other chemicals

Using silicone as a seam sealer: This type of sealer is ideal for outdoor gear and clothing made from synthetic materials. It's waterproof and flexible, making it ideal for sealing seams exposed to rain and other elements.

It is also ideal for sealing brickwork, tiles, slabs and concrete.

Advantages and Disadvantages of Silicone-Based Adhesives

A silicone rubber adhesive offers the user many different advantages:

PROS

• Temperature-resistant in a range from -85° to 572° Fahrenheit (-65° to 300° Celsius).

• Suitable for outdoor and indoor use

• Waterproof

• High UV and weathering resistance

• Highly elastic, making it suitable for bonding materials with different coefficients of thermal expansion, as well as for bonding vibrating parts Electrical non-conductor

CONS

Cannot withstand very high vibrations and strong movement loads in the long term due to its elasticity

One-component silicone adhesives generally not suitable for high-strength bonding that must withstand large loads on a permanent basis – over time, the silicone may wear and come loose

Cannot be painted over Produce an unpleasant odour of vinegar during curing phase

What is it used for?

The areas of application for silicone adhesives are diverse. For example, materials can be reliably bonded together, especially outdoors, where the adhesive seam must be weather-resistant and waterproof. Bonding and attaching tiles is also no problem with a silicone rubber adhesive. The following materials are reliably bonded with silicone-based glues:

• Outdoor gear and clothing made from synthetic materials

• Sealing seams exposed to rain and other elements

• Wood

• Glass

• Various plastics

• Metal

• Ceramics

• Enamel

• Paper and cardboard

• Brickwork, tiles, slabs, concrete

• Bathroom and kitchen sealant

Many users place particular emphasis on the ease of processing and flexibility of silicone, which is ideal for bonding substrates that are permanently exposed to vibrations or temperature fluctuations, such as:

• Parts on automobiles

• Fastening of illuminant parts

• Computer components

• Kitchen parts, for example on ovens or other electrical appliances

Preparation

Before you can bond the silicone, you must clean the substrates thoroughly. These must be free of any dirt, dust, oil, and grease. Any old grout must also be removed before you can bond new tiles with silicone, for example. The tiles to be laid or the other substrates can be cleaned with by rinsing it with water, but also with isopropanol or acetone.

Allow the surfaces to dry completely before starting the silicone bonding process. If the substrates show very uneven areas, these must still be filled or the surrounding raised areas must be ground down. Silicone is not suitable for bridging large gaps during the bonding process.

The Bonding Process

Before you apply the silicone adhesive to the actual substrates, it is recommended that you practice on a piece of cardboard. If the handling works well, you can apply the silicone to the substrates. Silicone can now be applied to one side of the entire surface to be bonded. If it is a large area, set the silicone more generously, but not too thickly. You can spread it out using a spatula.

Curing time should be 4-6 hours. But leave for 24 hours for complete cure.

The Finish

Stormsure is a NON-Staining Silicone Adhesive and Sealant.

Click here to read more on how to use Stormsure Silicone as a sealant

Morphits Polymorph is a hand mouldable thermoplastic, which comes in the form of 2mm white beads.

Melts at 62ºC in hot water or any other heat source. Non-toxic. Mould it into the shape you need and let it cool to room temperature. Recycle it many times by reheating.

Durable, Non-Brittle, Easy to use, Non-Toxic, reusable, biodegradable, Hundreds of uses.

Morphits polymorph is a linear polycaprolactone (PCL) monomer grade with high molecular weight (about 50,000). It is also at printable grade, exhibiting very good biodegradability and resistance to tear, moisture and impact.

Used for DIY, crafts, Repairs and many more…

Provides flexibility, enhanced durability, high elongation and excellent low temperature performance.

Directions: Place a spoonful beads in a cup and add boiling water. The beads quickly melt together and become transparent. The melted plastic can be moulded by hand, rolled out into sheets and stuck onto many surfaces. Polymorph can be reheated and remelted and reused many times over, so it is fully recyclable.

Morphits Polymorph is a hand mouldable thermoplastic, which comes in the form of 2mm white beads.

Melts at 62ºC in hot water or any other heat source. Non-toxic. Mould it into the shape you need and let it cool to room temperature. Recycle it many times by reheating.

Durable, Non-Brittle, Easy to use, Non-Toxic, reusable, biodegradable, Hundreds of uses.

Morphits polymorph is a linear polycaprolactone (PCL) monomer grade with high molecular weight (about 50,000). It is also at printable grade, exhibiting very good biodegradability and resistance to tear, moisture and impact.

Used for DIY, crafts, Repairs and many more…

Provides flexibility, enhanced durability, high elongation and excellent low temperature performance.

Directions: Place a spoonful beads in a cup and add boiling water. The beads quickly melt together and become transparent. The melted plastic can be moulded by hand, rolled out into sheets and stuck onto many surfaces. Polymorph can be reheated and remelted and reused many times over, so it is fully recyclable.

Morphits Polymorph is a hand mouldable thermoplastic, which comes in the form of 2mm white beads.

Melts at 62ºC in hot water or any other heat source. Non-toxic. Mould it into the shape you need and let it cool to room temperature. Recycle it many times by reheating.

Durable, Non-Brittle, Easy to use, Non-Toxic, reusable, biodegradable, Hundreds of uses.

Morphits polymorph is a linear polycaprolactone (PCL) monomer grade with high molecular weight (about 50,000). It is also at printable grade, exhibiting very good biodegradability and resistance to tear, moisture and impact.

Used for DIY, crafts, Repairs and many more…

Provides flexibility, enhanced durability, high elongation and excellent low temperature performance.

Directions: Place a spoonful beads in a cup and add boiling water. The beads quickly melt together and become transparent. The melted plastic can be moulded by hand, rolled out into sheets and stuck onto many surfaces. Polymorph can be reheated and remelted and reused many times over, so it is fully recyclable.

Quickly repair and Waterproofing of seams and needle holes on tents, bivvys, waterproof clothing and anything else that has non-watertight seams.

Stormseal is a water-based aqueous styrene-acrylic type polymer dispersion seam sealer. The liquid soaks into pinholes and leaking seams and dries clear, leaving a flexible and impermeable waterproof surface. 

Contains no VOC’s and is non-toxic. Can be washed off before it has dried. 

Test on a small area first to check compatibility.

This bottle (100ml) should cover 12m of seam (1” wide seam).

Directions

Shake bottle well. Remove cap. Pour Seam Sealer into suitable container, cup or dish.

Use brush supplied to apply as a film directly onto and covering the seam stitching or hole. Stormseal will soak into the stitching or hole. Allow to cure for 15-25 minutes or until clear and dry.

Dries in a few minutes. Dries clear and transparent. Remains flexible and waterproof!

Mix a small amount of this accelerator with Stormsure Flexible Repair Adhesive and it will help reduce the cure time from 10-12 hours down to about 1-2 hours.

Also you can use it to thin the adhesive so it may be applied with a paint brush. For waterproofing stitched seams you should make a mixture with only 25% adhesive and 75% accelerator. Mix quickly and thoroughly and paint it onto the surface. The mixture will "wick" its way into the tiny needle holes and cure inside the thread thus blocking the hole.

Some drysuit manufacturers use 3 layers. The first is about 85% accelerator, The second layer is 25% and the third layer is 5% accelerator. This combination should outlast the life of the suit.

Use it to preclean a surface and clean up afterwards.

NOT to be sent by MAIL. Courier Only

This small plastic box contains carabiners which are accompanied by plastic clips to make them work.

These clever clips attached to most fabrics and enable you to make an extra attachement point. You can use this on a tent to add extra support and guide ropes. On backpacks you can add several and then use a pack net to carry extra items. On clothing you can use it to attach cameras, keys and other small items which you need to keep handy. Sold in pairs.

Very simple to use and very effective.

BLACK AIR BRUSH BRAIDED HOSE WITH 1/8" BSP

1/8" SWIVEL FITTING AIR BRUSH RUBBER

BRAIDED AIR HOSE 3 METRE.
This braided air hose is supplied with the fittings necessary to connect to all Iwata airbrushes and the EW-440 / bd-128p / bd-132 and many, many more (all apart from the tiny 5mm badger fitting).
The hose connects directly to the airbrush one end with a 1/8" BSP - 1/8" BSP swivel nut.
The other nut is for connection to your compressor or air supply.

Squeeze a small amount onto your fingers and then rub it onto the fly line leader and tippet.

When the line lands on the water the Sinker breaks instantly through the meniscus on the water and the line sinks below the surface. The light is refracted by the ent in the meniscus and a floating line is blindingly obvious when seen from below; however is becomes almost invisible when it has broken through the meniscus.  

Use this excellent product to find pin hole leaks in breatheable and waterproof fabric. Just spray it on the suspect area and see the leaks on the other side.

The breathable fabric is hydrophobic, so when you try to find a pin hole in you waders under the kitchen tap, the water is repelled from the small holes and forms spheres of water which role off the fabric. It is only when the leak is under a meter or more of water pressure that the water will be forced through the pin holes and onto your feet  ( i.e. when you are waste deep in water in your waders!)

Once the holes are identified you can repair the area with Stormsure Flexible Repair Adhesive or a TUFF patch.

Comes in a 30ml bottle with finger pump sprayer.

This is a clear odourless oil which will help keep the fly dry and on the waters surface Just put a drop on you fingers and rub it into the feathers.

Squeezable bottle with dropper cap. Can be used with one hand.

50m roll of nylon tape with hot melt adhesive on the back.

Model name: T-2000X

Size: 22mm x 50m

Colour: Dark grey

Directions: Seal into position with a hot iron to cover glued and stitched seams on wetsuits and dry suits, for a perfect finish.